As a matter of fact, tall structures without indicators that they exist may pose a major threat to the life of passengers in an aircraft. Many people have perished as a result of airplanes and choppers hitting tall surfaces like mountains and hills. That is why any structure or building whose height is two hundred feet or above high is required to have a signal that indicates the height so that the pilot in any low flying aircraft can see it. Proper illumination can be achieved through installation of high intensity tower lighting systems.
Towers are simply structures that are tall and their thicknesses are usually un-proportional to their height. However, people often confuse such structures with masts. Masts, however, contain guy-wires used for supporting them. The structures are again distinguished from other buildings since they are usually not intended for residence. Instead, they are used for other functions such as indicating time using clocks.
They may be constructed for different reasons and to serve different purposes. For instance, they may be constructed to indicate time through fixing of a clock. Aerial cameras can also be fixed on top for surveillance and defensive security purposes.
They can also be used to transmit telecommunication signals and waves. Others can be constructed as adventure and tourist attraction sites. They can also be used on top of other buildings as lightning arrestors. Tower lighting is basically fixing of devices with illumination characteristic on the top of these tall structures, primarily to send information or signal which helps in avoiding collisions from bodies that are low flying.
These lights can be classified into two major types. One, the red lights are the commonly used lighting option. These lights usually follow a format where they go on and off at an interval of three seconds. The cycle continues until when the lamps are switched off. The other type is white xenon discharges and flashes. The white lamps are yet to be widely accepted although their demand continues to rise.
There are other minor types that also exist. These are obstruction lights that will have constant illumination. Red beacons or strobes use bulbs of incandescent filaments and are normally characterized with a short lifespan. Others include high and medium-intensity white strobe lamps. Strobes of medium intensity will be used on buildings with a height of about 250 feet while those with high intensity in buildings with a height of around 700 feet.
These lamps can either be used at night or during the day. At the same time, the lamps can be solar or electric powered. However, you need to work with the lamp dealers and installers in order to understand an ideal lamps.
There are certain benefits associated with installing and fixing these lamps. First, they provide signaling that indicates the presence of a tall structure which eliminates cases of accidents and collisions. Fixing the lamps also means complying with aviation laws which make you not to be prosecuted or charged due to noncompliance.
Towers are simply structures that are tall and their thicknesses are usually un-proportional to their height. However, people often confuse such structures with masts. Masts, however, contain guy-wires used for supporting them. The structures are again distinguished from other buildings since they are usually not intended for residence. Instead, they are used for other functions such as indicating time using clocks.
They may be constructed for different reasons and to serve different purposes. For instance, they may be constructed to indicate time through fixing of a clock. Aerial cameras can also be fixed on top for surveillance and defensive security purposes.
They can also be used to transmit telecommunication signals and waves. Others can be constructed as adventure and tourist attraction sites. They can also be used on top of other buildings as lightning arrestors. Tower lighting is basically fixing of devices with illumination characteristic on the top of these tall structures, primarily to send information or signal which helps in avoiding collisions from bodies that are low flying.
These lights can be classified into two major types. One, the red lights are the commonly used lighting option. These lights usually follow a format where they go on and off at an interval of three seconds. The cycle continues until when the lamps are switched off. The other type is white xenon discharges and flashes. The white lamps are yet to be widely accepted although their demand continues to rise.
There are other minor types that also exist. These are obstruction lights that will have constant illumination. Red beacons or strobes use bulbs of incandescent filaments and are normally characterized with a short lifespan. Others include high and medium-intensity white strobe lamps. Strobes of medium intensity will be used on buildings with a height of about 250 feet while those with high intensity in buildings with a height of around 700 feet.
These lamps can either be used at night or during the day. At the same time, the lamps can be solar or electric powered. However, you need to work with the lamp dealers and installers in order to understand an ideal lamps.
There are certain benefits associated with installing and fixing these lamps. First, they provide signaling that indicates the presence of a tall structure which eliminates cases of accidents and collisions. Fixing the lamps also means complying with aviation laws which make you not to be prosecuted or charged due to noncompliance.
About the Author:
You can get valuable tips on how to select a supplier of high intensity tower lighting products and more information about a reputable supplier at http://www.bkonled.com/products?category=Tower+Kits now.
0 commentaires:
Enregistrer un commentaire